• Etherlink XL PCI Network Interface Card 3C900 Installation Guide. • Notice The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

• • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C900 adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.

• 1 Connecting to a Netware 3.12 Server Windows for Workgroups 7 Execute INSTALL.EXE and set lines 1-5 as listed below; • C: NWCLIENT • YES • YES C: WINDOWS • NO • 3COM Etherlink XL/Fast Etherlink XL Family. 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer and driver installation. • • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C: Masters Win95 System Cabs ) • Novell Netware 3. Storyboard Quick Torrent Windows more. 12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. • C: Masters Win95 System Cabs ) 20 When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A: ” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C: LANDRV 3C900 Disk2 ”) 22 Click on “YES” to complete installation and restart the machine.

• • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C900 adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt. • 2 Connecting to a Netware 4.11 Server Windows for Workgroups 7 Execute INSTALL.EXE and set lines 1-5 as listed below; • C: NWCLIENT • YES • YES C: WINDOWS • NO • 3COM Etherlink XL/Fast Etherlink XL Family. 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer and driver installation. • • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1.

View and Download HP Vectra VL5 5 technical reference manual online. HP Vectra VL 5/xxx. Best Network Diagram Software Ware. 8 MB 1600 1200 1600 1152 882 is not preset on HP displays Drivers are.

• File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C: Masters Win95 System Cabs ) • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

• C: Masters Win95 System Cabs ) 20 When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A: ” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C: LANDRV 3C900 Disk2 ”) 22 Click on “YES” to complete installation and restart the machine. • • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C900 card. 3 After booting, insert the 3COM’s drivers disk “Etherlink 3C900 Ethernet ver. • 12 Type the path “A: WFW311 ” in the “Install Driver” dialog box then insert the 3COM 3C900 drivers disk 1 into the floppy drive, and click “OK.” (If you have an HP preloaded HDD, set path to “C: LANDRV 3C900 DISK1 WFW311”) 13 Select “3Com Fast Etherlink XL / Etherlink XL Adapter (3C90X)” in the “Unlisted or Updated Network Adapter”. • • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into an PCI slot.